We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

NV-202 Kit - VDSL2 LAN Extender

Call for Availability NV-202 Kit - VDSL2 LAN Extender

Overview

The NV-202 is our low cost LAN extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric using only a single copper wire pair. Designed specifically or a LAN to LAN extension and supporting both symmetrical and asymmetrical transmission at up to 100/100Mbps within 300 meters and 5/1Mbps at 3000 meters, this is a perfect solution to extend LAN to buildings, hotels, hospitals or any location outside of the 100 meters reach of Ethernet UTP.

Flexible Configuration

The NV-202 supports both central office (CO) and customer-premises equipment (CPE) modes selectable through DIP Switch. Customers can do the configuration for different needs adjustment. PIN1 ON of DIP Switch is CO side, PIN1 OFF of DIP Switch is CPE side.



Interleave delay function is used in digital data transmission technology to protect the transmission against noise issue and data error.
If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted.
Interleaving is a method of taking data packets, chopping them up into smaller bits and then rearranging them so that
once contiguous data is now spaced further apart into a non continuous stream. Data packets are re-assembled by your lan extender.

Easy Installation

The NV-202 may be installed on any level surface (e.g. a table or shelf or rail) that use bracket or DIN rail plate. The NV-202 supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

Automatic Bandwidth detection

The NV-202 supports band profile 17a and 30a, it can automatically detect the cable length and bandwidth depending on the distance to the configuration. The maximum bandwidth is symmetric bandwidth of 100Mbps / 0.3 km.


Applications

LAN Distance Extension
Two NV-202 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the home can become a port on the LAN.

 

 
 

External Splitter

When you need to use Ethernet and simultaneously use the telephone, You can choose the suitable external splitter in the local. It can be easily installed in the NV-202.

 


 Specifications


Standard Conformance
 Standard:
 IEEE802.3 standard
 IEEE802.3u standard
 ITU-T G993.2 VDSL2 standard

  Regulatory Compliance:

 FCC Class B
 CE
 

 RoHS compliance

 
 Hardware Specifications
 Physical Interface:

 2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
 1 x RJ-11/Terminal Block connector for VDSL2 line port
 1 x DIP Switch
 1 x Power Jack

 MTU: 1536 bytes

 Cable Connections:
 RJ-45 (Ethernet): Category 3~7 UTP/STP
 RJ-11 (VDSL2): 24AWG with twisted Pair phone wire
 LED indication:
 1 x Power LED
 2 x Link/Active Status for Ethernet port
 1 x Link LED for VDSL2 line port
 1 x CO Mode indicator LED
 1 x CPE Mode indicator LED
 Power Requirement:
 Input Voltage: 12VDC / 1A (Commercial-grade Power Adapter)
 Typical Power Consumption:
 5 W
 VDSL2 Line Code:
 Discrete multitone (DMT) modulation
 VDSL2 Transmission Mode:
 Packet Transfer Mode (PTM)
 Operating Temperature:
 0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
 Storage Temperature:
 -20°C ~ 70°C (-4°F ~ 158°F)
 Humidity:
 10 to 90% (non-condensing)
 Weight:
 About 0.34 kg
 Dimensions:
 95 x 110 x 27 mm (3.74" x 4.33" x 1.06")


* Specifications are subject to change without prior notice




  • Brand: Netsys
  • Product Code: NV-202 Kit
  • Availability: Call for Availability

Tags: nv202, nv202 kit