Overview
Economic Solution for Industrial Modbus TCP/RTU/ASCII Network Integration PLANET has added the Industrial Modbus TCP/IP Protocol to industrial management level products to provide its easily-integrated industrial management level products with SCADA/HMI system and other data acquisition systems in factory floors. Moreover, the industrial IT SNMP network is upgraded to the Industrial automation Modbus TCP/IP network. PLANET industrial management level products with the Modbus TCP/IP Protocol offer flexible network connectivity solution for industrial automation environment. To complete the industrial automation environment application solution, PLANET has announced a first industrial level 1-port RS422/485 Modbus Gateway -- IMG-110T, a bridge that converts between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP30 metal housing. |
Stable Performance in Hardened Environment Design The IMG-110T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Its operating temperature ranging from -40 to 75 degrees C allows the IMG-110T to be placed in almost any difficult environment.
The IMG-110T is equipped with a compact IP30-rated metal case that allows wall mounting for efficient use of cabinet space. The IMG-110T also provides an integrated power supply source with wide-ranging voltages (9 to 48V DC) ideally suitable for worldwide operation with high availability applications.
Features Industrial Case and Installation
- LED indicators for system, network and RS422/585 port diagnostics
- DIP switch on the upper panel for resetting to factory default
- Wall-mount kit
Hardware
- Built-in IP-based Web interface and telnet interface for remote management
- Software Protocol supports Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS
- Supports RTU Master, RTU Slave, ASCII Master, and ASCII Slave four serial operation modes via management interface
- Master mode supports 32 slave TCP connection requests
- Slave mode supports 16 TCP master connections
- Supports IP address and MAC address filtering function
- PLANET Modbus Gateway utility for finding client device on the network and related IP subnet address setting to reset to factory default function
- PLANET Smart Discovery utility automatically finds the client devices on the network
- Firmware upgrade/configuration backup and restore via HTTP protocol
Management Function
- One RS422/485 port with 5-contact terminal block
- Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX standard
- Supports 10/100BASE-TX RJ45 port with distance up to 100m
Ethernet Interface
- One RS422/485 port with 5-contact terminal block
- Cost effective for RS422/RS485 to Fast Ethernet 10/100BASE-TX application
- Supports 5-wire RS422 or 3-wire RS485 with 5-contact terminal block operation
- 300bps~115200bps baud rate and non-blocking communication
Serial Interface
- Wallmount-type IP30 metal case
- The 2-contact terminal block connector on the top panel of Industrial Modbus Gateway is used for DC power input (9-48V)
- Supports serial port isolation
- -40 to 75 degrees C operating temperature
Applications
RTU/ASCII Master to Multi Modbus TCP/IP Slaves The IMG-110T can act as a bridge between the industrial RTU/ASCII master equipment and the multi-industrial TCP/IP slave equipment in a Modbus TCP/IP networking environment to control multi-industrial TCP/IP slave equipment via the industrial RTU/ASCII master equipment. | | | | Multi Modbus TCP/IP Master to RTU/ASCII Slaves The IMG-110T can operate as a bridge between the multi-industrial TCP/IP master equipment and the industrial RTU/ASCII slave equipment in a Modbus TCP/IP networking environment to control the industrial RTU/ASCII slave equipment via the multi-industrial TCP/IP master equipment. | | |
Specifications
Serial Port | Interface | RS422/ RS485 x 1 | Connector | 5-contact terminal block for RS422/RS485 | Isolation | Serial port isolation | Baud Rate (Data Rate) | 300bps to 115200bps | Data Bits | 7, 8 | Parity Type | Odd, Even, None, Space, Mark | Stop Bit | 1, 2 | Flow Control | H/W, None | Signals | RS422 : Tx+, Tx-, GND, Rx+, Rx- RS485: Data A (+), GND, Data B (-)
| Distance | RS422/RS485 for 1200m transfer distance | Operation Mode | RTU Master/RTU Slave/ASCII Master/ASCII Slave Master mode: Supports up to 32 slave TCP connection requests Slave mode: Supports up to 16 TCP master connection requests
| Fast Ethernet Port | Standard | IEEE 802.310BASE-T standard IEEE 802.3u 100BASE-TX standard IEEE 802.3x Full-duplex flow control
| Connector | RJ45 | Distance | 100 meters | Hardware | Copper Port | 10/100BASE-T RJ45 TP x1, auto-MDI/MDI-X, auto-negotiation | Serial Port | RS422/RS485 x 1 | DIP Switch | Reset system to factory default | LED Indicators | System: Power x 1 10/100BASE-TX Port: Link/Active x 1 RS422/RS485 Serial Port: TX (Transmit) x 1, RX (Receive) x 1 | Operation Mode | RTU Master RTU Slave ASCII Master ASCII Slave
| Dimension (W x D x H) | 69 x 100 x 22 mm | Weight | 238g | Power Input Connector | 2-contact terminal block connector DC power (9-48V) * | Power Consumption | 1.61 watts/5.4BTU (max.) | Installation | Wall-mount kit | Mechanical | Metal | Standards Conformance | Standards Compliance | IEEE 802.310BASE-T standard IEEE 802.3u 100BASE-TX standard IEEE 802.3x Full-duplex flow control EIA/TIA RS422/485
| Regulatory Compliance | FCC Part 15 Class B, CE | Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)
| Environment | Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing)
| *Remarks | Please follow the DC power input symbol from the front panel of the IMG-110T -- insert positive DC power wire into V+, and negative DC power wire into V-. Otherwise, it will damage the device |
|