-200x200.jpg)
-200x200.jpg)
E19-102 2-port Indoor 30/60/95 Watt PoE Extender
The Aetek E19-102 2-Port Indoor 30/60/95 watt PoE Extender is an ideal for indoor environments to extend the PoE reach to two end-point devices such as Wireless Access Points, IP Cameras and IP Phones from an existing PoE Injector or Switch.
Two units of E19 series ( E19-101 or E19-102) can be daisy-chain to prolong range of PoE devices reaching up to 300m from end to end or up to 500m by star topology.
No power adapter required, The Aetek E19-102 PoE extender can be powered by PoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.
-2-port PoE out
Networking Specifications
Total Fast 10/100 Ethernet Port
3
Mac Table
2k
Bandwidth
Max. 100 Mbps
Switching Capacity
1 Gbps
Auto-MDI/MDI-X, Auto-Negotiation
Supported
Power Specifications
Extension Distance
2 Units, Daisy-chain Installation Up to 300M Extension (No Local Power Required)
PD Input Power
50~57VDC , max. 72W
PSE Output Power
48~55VDC, max. 70W
PD Power Pin Assignment
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
PSE Power Pin Assignment
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
PD Fast Ethernet (RJ45)
1
PSE Fast Ethernet (RJ45)
2
PSE Power On/Off Dip Switch
Supported
Mechanical Specification
Environmental Specifications
Operating Temperature
0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature
-20°C ~ 70°C (-4°F ~ 158°F)
Operating Humidity
10% to 90% non-condensing
Certifications
EMC
CE,FCC,VCCI,C-Tick
