We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

CL1212 CopperLink Ultra High-Speed Copper Ethernet Extender 168 Mbps

CL1212 CopperLink Ultra High-Speed Copper Ethernet Extender 168 Mbps

The Patton Copperlink CL1212 Ultra High-Speed Copper Ethernet Extender combines data flows from up to 2 network-enabled devices onto a single twisted pair or coax cable, the CopperLink Model CL1212 can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation.

With achievable line rates up to 168 Mbps, the CL1212 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1212 is engineered to re-use existing infrastructure previously employed in such legacy applications as alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7. 

 A built-in two-port Ethernet switch makes the CopperLink CL1212 ideal for delivering multiple IP information streams over a single cable. At a guardhouse or security kiosk for example, you could aggregate IP data from a laptop and a high-resolution IP video camera for simultaneous transmission over a single Ethernet connection.


NOTES FOR ORDERING: 


RJ-45 Line Version

CL1212/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line, 100-240VAC

CL1212/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line, 100-240VAC


Terminal Block Line Version

CL1212/TB/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC

CL1212/TB/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC 

 

- Ethernet Extension Extend 10/100Base-TX Ethernet well beyond its 328-foot (100-meter) limitation over a single unshielded twisted pair (UTP) or Cat 5e/ Cat 6 or Cat 7 cable.


- Operates Over Twisted Pair Realise fibre-optic speeds without the expense and hassle of installing new cables or line-of-site wireless circuits.

 

- Plug and Play Set these units up straight out of the box. No configuration is required. Dual auto-sensing 10/100 Ethernet ports support full or half duplex operation. 


- Multiple Line Rates Supported Switch-selectable rate mode options optimise rate and reach for the noise environment, wire gauge/type and length.


- Transparent LAN Bridging Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged).


- Made in the USA The Patton CopperLink  CL1212 is designed by Patton engineers and built in Patton's Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.


CopperLink Line Interface

- RJ-45 (pin 4 = ring; pin 5 = tip) or - Terminal block, 2 position


CopperLink Line Modulation

- DMT (Discrete Multi-Tone) 


Ethernet Interface (x2)

- 8-position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.

 

Protocol

- Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames.

- Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG. 


Target SNR Modes

-   6 dB and 9 dB 


Management

- 8-position DIP switch 


Monitoring

- 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status.

 

Power Supply

- External AC: 100–240 VAC 


Compliance

- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC 


Environment

- Temperature: 0 to 50°C

- Humidity: 5 to 95%, non-condensing

- Extended Temperature: -40 to 85°C ( CL1212E or CL1211E)

- Extended Humidity: 5 to 85%, condensing (CL1212E/CC or CL1211E/CC)

 

Dimensions

- 105 W x 38.1 H x 95.3 D mm

Weight

- 181 g


MTBF

- 77,000 hours 


CopperLink™ 1212 application diagram



Long Range Asymmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
67
16
1000 (305m)
59
16
2000 (610m)
45
11
3000 (914m)
31
5
5000 (1.5km)
17
682 kbps
10,000 (3km)
4
263 kbps


High Speed Asymmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
168
95
1000 (305m)
126
54
2000 (610m)
60
21
3000 (914m)
42
6
3500 (1km)
35
1


High Speed Symmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
121
144
1000 (305m)
73
103
2000 (610m)
45
37
3000 (914m)
30
10
3500 (1km)
16
4


CL1212/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line, 100-240VAC

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU


CL1212/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line, 100-240VAC

* Includes Transmitter (Local) and Receiver (Remote) and PSUs


CL1212/TB/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU


CL1212/TB/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC

* Includes Transmitter (Local) and Receiver (Remote) and PSUs

Available Options

Tags: CL1212eui, cl1212eui2pk, cl1212tb