-200x200.jpg)
-200x200.jpg)
-250x250.jpg "NDR-120-48 120w 48V DC Din-Rail Power Supply w/ adjustable 48-56V DC Output")
IVC-234GT Industrial 1-Port BNC / RJ11 to 4-Port Gigabit Ethernet Extender
* Note: 2 x IVC-234GT units required for 1 Link / Pair.
Planet IVC-234GT Industrial 1-Port BNC / RJ11 to 4-Port Gigabit Ethernet Extender
High Performance Industrial Gigabit Ethernet Extender
To fulfill the needs of long-distance and higher speed required Ethernet over Coaxial or 2-wired UTP applications, PLANET Technology offers a new Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient. Working well with a pervasive coaxial or RJ11 network, the IVC-234GT provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.2km.
If the IP network that consists of IP camera, wireless access point, NVR and digital signage display requires an extension of beyond the 100-meter distance, the IVC-234GT will be the best option as it can transmit data over the coaxial cable or telephone wire. A 100-meter distance can only be extended on an UTP cable.
Superior Upstream and Downstream Transmission
The design of the IVC-234GT is based on the two-core networking technology, Gigabit Ethernet and VDSL2. The IVC-234GT offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals.
- Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
- Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps
The symmetric mode provides a similar transmission rate on both downstream and upstream while the asymmetric mode performs higher transmission quality in short range. In all, when the IVC-234GT is in the symmetric mode, it provides a better upstream performance, and when it is in the asymmetric mode, it gives a better downstream performance.
Ethernet over Long Distance Existing Coaxial or RJ11 Cable
The IVC-234GT is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from the existing analog system to full digital system. It features two types of transmission, the coaxial or RJ11. A normal UTP cable can only be extended up to 100 meters, but with the IVC-234GT, the distance for Ethernet networking can be extended up to 1,200 meters (3,937ft.), which is ideal for the following network applications:
- Long-distance IP network devices
- IP digital signage
- Cable TV to IPTV
- Distance video education
- Electronic billboards
If you have coaxial or RJ11 cable in your existing environment, you can install a pair of the IVC-234GT very simply without the need to build additional network wires, thus saving costs for network construction.
Easy Installation
The IVC-234GT offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one IVC-234GT in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.
ADSL2+ Fallback
For ISPs providing ADSL broadband services, the IVC-234GT can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The IVC-234GT can also be directly switched over to VDSL2 after the network upgrade.
Long Reach Ethernet
- ITU-T G.993.5 G.Vectoring and G.INP
- Upstream/Downstream bandwidth up to 200/100Mbps
- CO/CPE mode selectable via DIP switch
- Selectable target band plan and SNR margin
- One BNC/RJ11 connector for VDSL connection
- Uses existing RG59/RG6 coaxial cable
- Used in pairs to extend Point-to-Point connection up to 1.2km
- Supports IEEE 802.1Q VLAN tag transparency
Industrial Case and Installation
- Slim-type IP30 metal case
- DIN rail and wall-mount design
- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Minimum installation time (Simply by Plug and Play)
- Supports extensive LED indicators for network diagnosis
Hardware Specifications
TP interface 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL BNC 1 BNC female Ethernet over Coaxial port
Cabling:
Coaxial cable: 75 ohm
RG-6/U cable, less than12Ω/1000 ft
RG-59/U cable, less than 30Ω/1000 ft.
Maximum Distance:
Max. 1.2km with data transmission (3,937ft.)
VDSL RJ11 1 VDSL2/ADSL2+ RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.2km (3,937ft.)
DIP Switch & Functionality DIP-1: Select CO or CPE mode
DIP-2: Select G.INP or Interleaved mode
DIP-3: Select Band Profile (Asymmetric or Symmetric)
DIP-4: Select SNR of 12dB or 8dB
LED Indicators Power 1/Power 2: Green
FAULT: Red
1000BASE-T LNK/ACT: Green
10/100BASE-TX LNK/ACK: Green
VDSL: Green
CO: Green
CPE: Green
ESD Protection 6KV DC
Enclosure IP30 slim metal case
Installation DIN-rail kit or wall-mount ear
Dimensions (W x D x H) 32 x 135 x 87.8mm
Weight 185g
Power Requirement DC input: Dual 12~48V DC, 0.4A max.
24V AC
Power Consumption 5.7 watts
Performance
Upstream/ Downstream Performance Table with RJ11 Cable
CO, Interleave, Asym, 8dB
200M -> 93Mbps/190Mbps
400M -> 67Mbps/164Mbps
600M -> 38Mbps/116Mbps
800M -> 24Mbps/59Mbps
1000M -> 9Mbps/45Mbps
1200M -> 6Mbps/30Mbps
CO, Interleave, Sym, 8dB
200M -> 143Mbps/148Mbps
400M -> 118Mbps/119Mbps
600M -> 71Mbps/75Mbps
800M -> 49Mbps/36Mbps
1000M -> 21Mbps/25Mbps
1200M -> 16Mbps/24Mbps
G.INP, ASym, 8dB
200M -> 92Mbps/190Mbps
400M -> 68Mbps/165Mbps
600M -> 37Mbps/112Mbps
800M -> 27Mbps/56Mbps
1000M -> 9Mbps/46Mbps
1200M -> 5Mbps/31Mbps
G.INP, sym, 8dB
200M -> 143Mbps/148Mbps
400M -> 116Mbps/115Mbps
600M -> 71Mbps/69Mbps
800M -> 49Mbps/32Mbps
1000M -> 19Mbps/27Mbps
1200M -> 16Mbps/23Mbps
CO, Interleave, Asym, 12dB
200M -> 85Mbps/174Mbps
400M -> 59Mbps/146Mbps
600M -> 28Mbps/94Mbps
800M -> 22Mbps/49Mbps
1000M -> 7Mbps/40Mbps
1200M -> 3Mbps/28Mbps
CO, Interleave, Sym, 12dB
200M -> 132Mbps/126Mbps
400M -> 103Mbps/104Mbps
600M -> 59Mbps/60Mbps
800M -> 38Mbps/27Mbps
1000M -> 15Mbps/24Mbps
1200M -> 6Mbps/20Mbps
G.INP, Asym, 12dB
200M -> 85Mbps/174Mbps
400M -> 57Mbps/144Mbps
600M -> 28Mbps/94Mbps
800M -> 22Mbps/49Mbps
1000M -> 7Mbps/40Mbps
1200M -> 3Mbps/28Mbps
G.INP, Sym, 12dB
200M -> 129Mbps/136Mbps
400M -> 99Mbps/96Mbps
600M -> 61Mbps/55Mbps
800M -> 39Mbps/24Mbps
1000M -> 15Mbps/26Mbps
1200M -> 12Mbps/20Mbps
Upstream/ Downstream Performance Table with Coaxial Cable
CO, Interleave, Asym, 8dB
200M -> 54Mbps/184Mbps
400M -> 49Mbps/148Mbps
600M -> 36Mbps/100Mbps
800M -> 21Mbps/50Mbps
1000M -> 7Mbps/42Mbps
1200M -> 5Mbps/27Mbps
CO, Interleave, Sym, 8dB
200M -> 131Mbps/148Mbps
400M -> 93Mbps/118Mbps
600M -> 77Mbps/66Mbps
800M -> 44Mbps/30Mbps
1000M -> 20Mbps/25Mbps
1200M -> 13Mbps/27Mbps
G.INP, ASym, 8dB
200M -> 89Mbps/185Mbps
400M -> 57Mbps/155Mbps
600M -> 33Mbps/75Mbps
800M -> 17Mbps/66Mbps
1000M -> 13Mbps/59Mbps
1200M -> 4Mbps/32Mbps
G.INP, sym, 8dB
200M -> 140Mbps/144Mbps
400M -> 104Mbps/113Mbps
600M -> 62Mbps/73Mbps
800M -> 40Mbps/29Mbps
1000M -> 20Mbps/27Mbps
1200M -> 14Mbps/20Mbps
CO, Interleave, Asym, 12dB
200M -> 75Mbps/169Mbps
400M -> 54Mbps/128Mbps
600M -> 26Mbps/80Mbps
800M -> 17Mbps/39Mbps
1000M -> 5Mbps/29Mbps
1200M -> 3Mbps/28Mbps
CO, Interleave, Sym, 12dB
200M -> 125Mbps/128Mbps
400M -> 89Mbps/99Mbps
600M -> 64Mbps/53Mbps
800M -> 37Mbps/26Mbps
1000M -> 19Mbps/28Mbps
1200M -> 15Mbps/20Mbps
G.INP, Asym, 12dB
200M -> 79Mbps/166Mbps
400M -> 47Mbps/137Mbps
600M -> 31Mbps/73Mbps
800M -> 13Mbps/45Mbps
1000M -> 6Mbps/38Mbps
1200M -> 3Mbps/22Mbps
G.INP, Sym, 12dB
200M -> 117Mbps/123Mbps
400M -> 89Mbps/96Mbps
600M -> 52Mbps/43Mbps
800M -> 39Mbps/24Mbps
1000M -> 15Mbps/26Mbps
1200M -> 12Mbps/20Mbps
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Packet Size 9K bytes
System Specifications
VDSL Compliance VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G. Vectoring
ITU-T G.998
G.INP
ADSL Compliance Capable of ADSL2/2+ standard
ITU G.992.3 G.dmt.bis
ITU G.992.5 G.dmt.bisplus
Data Rate: Up to 24Mbps
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.Vectoring and G.INP
ITU-T G.998
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Point-to-Point Application -- LAN to LAN Connection
One set of the IVC-234GT could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one IVC-234GT must be Master (CO mode) and the other one is Remote (CPE mode).
Community/Campus Surveillance and Security over IP
To take advantage of digital surveillance system and keep the benefits of coaxial cable/RJ11 of the IVC-234GT, communities, campuses and enterprises can upgrade their analog camera system to IP camera surveillance system without using additional new wires. As the IVC-234GT comes with one RJ45 port and one BNC Ethernet over Coaxial port, just plug in the UTP cable of IP camera to the Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
