2110/P POE Powered CopperLink Ethernet Booster
The CopperLink™ Model 2110P Ethernet Booster is POE 802.3af powered and doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Model 2110P Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations. The Model 2110P is completely transparent to protocol making them true plug-and-play devices, completely interoperable with any network enabled device. The Model 2110P will not cause latency or degradation on your network connections, ensuring the maximum 100-Mbps full-duplex line rate. Both the Model 2110P and 2110EUI-PSE not only transparently pass on Ethernet data, but also feed on and forward PoE power to devices such as wireless access points, IP cameras, and VoIP phones.
Ethernet & PoE Extension—Doubles 10/100Base-TX Ethernet and PoE to 200 meters (656 feet). Multiple units can be used in series for even longer extensions.
Operates over CAT5—Reduces the cost and hassles of adding switches, hubs, and wireless access points.
Plug and Play—No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and automatic MDI-X.
Transparent LAN Operation—Transparent operation ensures the highest rate possible for each extension distance.
No External Power Required—Power over Ethernet (PoE) capability enables both extenders and peripheral devices to be powered over standard twisted-pair Ethernet cable.
Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
The CopperLInk Ethernet Booster is ideal for delivering Ethernet to remote network enabled devices located outside Ethernet’s limited range of 328 feet (100 meters). Several configurations are possible based on individual requirements.
Model 2110/P: PoE Pass Through & Ethernet Extension
Model 2110/PSE: PoE Injection & Ethernet Extension
Model 2110/EUI: Ethernet Extension
Class of PoE Device
No PoE Load
CopperLink™ Copper Ethernet Extenders
# of wire pairs
Max. Speed (Mbps)
Distance at Max. Speed
2,625 ft/0.8 km
(328ft/100m per 2110)
500 ft/0.15 km
4,600 ft/1.4 km
4,600 ft/1.4 km
2,953 ft/0.9 km
4,593 ft/1.4 km
4,265 ft/1.3 km
10,827 ft/3.3 km
16,404 ft/5.0 km
|2110/EUI||CopperLink 10/100 Mbps Ethernet Booster; 100-240 VAC||General Availability|
|3||2110/P||CopperLink 10/100 Mbps Ethernet Booster; 802.3af pass through||General Availability|