CL1101/PAFA/RJ45/EUI-2PK CopperLink PoE Ethernet Extender Kit (RJ45 Line)
Patton CopperLink CL1101/PAFA/RJ45/EUI-2PK PoE Ethernet Extender Kit (1x 10/100; 802.3af (mode A); RJ45 Line; Line Powered; AC Adapter 100-240VAC)
* Kit includes Local-CO (CL1101/L/P/RJ45/EUI) and Remote-CPE (CL1101/R/PAFA/RJ45/E)
With global expansion of the Internet of Things (IoT), demand for IP/Ethernet-connected devices is soaring. Billions of devices are already capable of connecting to the Internet. Ethernet—and power-over-Ethernet (PoE) in particular—has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use.
Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure—involving tearing into walls, ceilings, pavement, and worse.
The CopperLink CL1101 kit from Patton enables Ethernet connectivity over previously installed copper infrastructure. The solution breathes new life into circuits previously deployed for such traditional non-IP applications as RS232/485 controls, alarms, CCTV, analogue phones, intercom speakers, and others.
Instantaneously install PoE-compliant devices such as wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, and more—with no additional overhead cost. With the extended reach the CL1101 kit provides, you can install your IP terminal equipment exactly where you want it! Flexibility of device location is paramount in such applications as building security, where increased perimeter dimension and expanded spot coverage area are critical.
Extends 10/100Base-TX Ethernet over 1005meters using 2-wire, 24-AWG twisted-pair, Cat 3, Cat 5e/6/7.
PowerPlus technology powers up both the remote CopperLink extender and the PoE enabled device connected to it. No power is required at the remote location.
Transparent LAN Bridging
Passes higher layer protocols, including 802.1Q VLAN tagged and untagged packets. Fully transparent to various video compression schemes such as WMV, MPEG-4 and MJPEG.
Plug and Play
Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
Made in the USA
This Patton equipment is designed by Patton engineers and are built in Patton's Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
Line Interfaces (Data)
1 x RJ45
Supports 1-4 pairs
1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
Power, Line, (10 or 100 operation), Ethernet, and PoE
Transparent to high layer protocol
Supports 802.1Q VLAN tagged frames
Transparent to IP video schemes
Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
Power Injection (PSE only)
DC voltage on Ethernet port
External AC Adapter 100–240 VAC to 54 VDC
Input: 30–57 VDC (Recommended 54 VDC)
MTBF (Mean Time Before Failure)
Temperature: 0 to 50°C (standard)
Humidity: 10 to 95% (non-condensing)
10.5 W x 3.8 H x 9.5 cm
Net 22 g
FCC Part 15A, Class B
EMC Directive 89/336/EEC
LVD Directive 73/23/EEC
Patton CopperLink CL1101 Extends Power and Ethernet to compliant or legacy PoE devices using already installed twisted-pair cable.
|Twisted-Pair Data Reach Estimates|
|10 Mbps||100 Mbps|
|2 wire||4 wire||8 wire|
|Min. distance link time||5 sec||157 sec||5 sec||5 sec||5 sec|
|Max. distance link time||5–10 sec||8–265 sec||5 sec||6 sec||6 sec|
|Max. distance PoE class||Class 1||Class 2||Class 2/3||Class 4||Class 3/4|
|Twisted-Pair Power Delivery Estimates|
|PoE Class||2 wire||4 wire||6 wire||8 wire|
|Class 2/3||Class 2/3||Class 4||Class 4||Class 4|