We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

GT-805A - 10/100/1000Base-T to 1000Base-SX/LX SFP Media Converter

GT-805A - 10/100/1000Base-T to 1000Base-SX/LX SFP Media Converter
Click Image for Gallery
GT-805A - 10/100/1000Base-T to 1000Base-SX/LX SFP Media Converter
Planet GT-805A 10/100/1000Base-T to 1000Base-SFP (mini-GBIC-LC) Gigabit Media Converter

* SFP fibre module (mini-GBIC) required for operation - A choice of multimode or singlemode SFPs available for distances of up to 60km. 

Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-805A media converter support conversion between 10/100/1000Base-T and 1000Base-SX/LX SFP Module required) network.

The GT-805A has slot for a gigabit fibre SFP module to be inserted and can operate over singlemode or multimode fibre infrastructure depending on the SFP you select for your application.

The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

Distance Extension with High Performance and Steady Network Communications

PLANET GT-805A gigabit media converter extends communications distance with highly Gigabit performance via fibre optic cable.
The GT-805A provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as singlemode or multimode LC connectorsfor various fibre optic applications.

Enhanced Smart Management Features

The GT-80A5 provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass-through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide an efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fibre line loses the link, the converter’s fibre will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Moreover, Even the web UI is not available on GT-805A, the network manager can still remotely control and monitor GT-805A by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting.

Easy Installation
The GT-805A allows two types of the segment to connect easily. The GT-805A can be used as a standalone unit or point-to-point unit when powered by its DC adapter,  or it used as a slide-in module to Planet 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R). These media chassis can assist in producing the power for the GT-805A to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-805A also supports flow control and back pressure in half-duplex to eliminate packet loss.

- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX. 

- TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X. 

- 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m. 

- 1000Base-LX: 9/125μm single-mode cable provides long distance for 60km

- 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters. 

- Layer 2 key Feature

–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 

–Supports auto MDI/MDI-X function 

–Store-and-Forward mechanism

–Non-blocking full wire-speed forwarding rate 

• Media conversion between 10/100/1000Base-T and 1000Base-SX/LX. 

• Fiber media allows:

–Multi-mode fiber using LC (SFP) connector;

–Single-mode fiber using LC (SFP) connector

- Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)

- Wall-mountable design

- LED indicators for easy network diagnostics

- Provides DIP switch for LFP function (Disable / Enable) setting

- OAM TS-1000 supported

- 9K Jumbo Frame Supported

- Compact in size, easy installation

Hardware Version

V3

Standards

IEEE 802.3, 10Base-T 

IEEE 802.3u, 100Base-TX

IEEE 802.3ab, 1000Base-T

IEEE 802.3z, 1000Base-SX/LX

Ports

1 x 10/100/1000Base-T port,

1 x 1000Base-SX/LX port (SFP Slot)

Copper Interface

RJ-45 port (Auto-MDI/MDI-X) Twisted Pair

Optic Interface

SFP Slot

Fibre Maximum Distance

Dependant of SFP Module (See MGB-Series)

Optic Wavelength

Dependant of SFP Module (See MGB-Series)

Max. Optical Launch Power

N/A

Min. Optical Launch Power

N/A

Max. Input Power

N/A

Min. Input Power

N/A

Optical Link Budget

N/A

Speed

Twisted-pair:

10/20Mbps for half/full-duplex

100/200Mbps for half/full duplex 

2000Mbps for full-duplex

Fiber-optic: 2000Mbps for full-duplex

Cable

Twisted-pair

10Base-T: 2-pair UTP Cat. 3,4,5, up to 100m

100Base-TX: 2-pair UTP Cat. 5, up to 100m

1000Base-T: 4-pair STP Cat 5 up to 100m

Fiber-optic Cable

50/125μm or 62.5/125μm multi-mode fiber cable, up to 

220/550m. 

9/125μm single-mode cable, providing long distance for 

10/15/20/30/40/50/60/70/120km (vary on fibre transceiver or SFP module)

LED Indicator

PWR

TP LINK/ACT, 1000

Fiber LINK/ACT

DIP Switch

LFP function (Disable / Enable) setting

OAM

TS-1000 and IEEE 802.3ah Terminal mode supported

Jumbo Packet Size

9K

Power Consumption

4.6 watts / 15 BTU (maximum)

Power Input

DC 5V / 2A

Dimensions (W x D x H)

2.6 x 7.0 x 9.7 mm

Weight 0.2kg (0.6kg Boxed with Contents)

Operating Environment

Operating temperature: 0 to 50 degrees C; Humidity: 5~95% non-condensing

Storage Environment

storage temperature: -10 to 70 degrees C; Humidity: 5~95% non-condensing

Emissions

FCC Class A, CE Class A

Fiber-optic Networking for ISPs, Enterprises, and Homes.

With high performance of data transmission and easy installation, the GT-805A can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building), for small office network environment of enterprises.




Available Options

Add to Wish List Compare this Product

Tags: gt805a