We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

IPOE-470 4-port Gigabit 802.3bt PoE++ Injector Hub (48 to 54VDC Input)

New IPOE-470 4-port Gigabit 802.3bt PoE++ Injector Hub (48 to 54VDC Input)

Compact and Robust Industrial 802.3bt PoE++ Network Solution


PLANET IPOE-470 4-port Industrial IEEE 802.3bt PoE++ injector hub series features four 10/100/1000BASE-T 95-watt 802.3bt type-4 PoE++ injector ports. With a total PoE budget of 240 watts, it delivers 802.3bt PoE++ power over Ethernet UTP cables which allow data and power to transmit simultaneously to a remote 802.3bt/at powered device (PD).


The IPOE-470 provides a quick, safe and cost-effective 802.3bt PoE++ network solution for small businesses and enterprises. It is designed to perfectly upgrade an existing network infrastructure to 802.3bt PoE++ network system without replacing the existing Ethernet switches and also enables centralization of the power supply.


The IPOE-470 Provides a Total PoE Budget of 240 Watts


802.3bt PoE++ Meets Ultra Power Demands of Powered Devices


As the IPOE-470 adopts the IEEE 802.bt PoE++ standard and PoH technology, it is capable to source up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant PD. It possesses the triple amount of the power capability when compared to the conventional 802.3at PoE+ and is an ideal solution to satisfy the growing demand for higher power consuming network PDs, such as:


- PoE PTZ speed dome cameras

- Network devices 

- Thin clients

- AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks

- Remote digital signage displays

- PoE lightings


 


Quick and Easy 802.3bt/at PoE Network Deployment


The IPOE-470 is installed between a regular Ethernet Switch and the PDs. Four ports are network (Ethernet) ports for data input while the other four ports are PoE++ ports for data and power output. Both power and data are transferred simultaneously over the UTP cables to various 802.3bt/at PDs without affecting the existing network performance and functions.


With data and Power over Ethernet from one unit, the IPOE-470 can reduce power cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.



Intelligent LED Indicator for Power Input and Real-time PoE Usage


The IPOE-470 series helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication. The “Power Input” allows user to know the status of dual DC power input. The “PoE Usage” displayed on the panel of the IPOE-470 series has three amber LED indicators of different power usages indicating 80W, 160W and 240W. Via the power usage LED, the IPOE-470 enables the administrator to monitor the status of the power usage of the connected PDs in real time.


Convenient and Reliable Power System


To facilitate the 802.3bt PoE++ usage with commonly-used 48~54V DC power input for transportation and industrial-level applications.Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.



Ultra Power Budget for PoE Extension

With up to 95-watt PoE output capability, the IPOE-470 can extend much longer distances by using PLANET PoE Extender for powering up the PoE PD which can be installed over more than 100 meters away.


Stable Operating Performance under Difficult Environments


Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-470 provides a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb-side traffic control cabinets. 


The IPOE-470 can be easily installed by way of Plug and Play and operates stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-470 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for space-limited environments.


 Robust Protection

The IPOE-470 provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.


Physical Ports


Four 10/100/1000BASE-T Gigabit RJ45 interfaces

4-port data input

Four 10/100/1000BASE-T Gigabit RJ45 interfaces

4-port data + power output

 


Power over Ethernet


+ Complies with 802.3bt Power over Ethernet Plus Plus type 4 PSE

- Backward compatible with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PSE

- Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered

- Up to 240-watt PoE budget

- Supports PoE output power up to 95 watts for each PoE port

- All PoE ports support 802.3at end-span/mid-span PoE 36-watt injector function

- Auto detects powered device (PD)

- Circuit protection prevents power interference between ports

- Forwards both Ethernet data and PoE power to remote device over a 100-meter (328ft.) distance

-  3 real-time PoE power usage indicators

 


Industrial Case and Installation


- IP30 metal case 

- DIN-rail and wall-mount designs

- 1 terminal block for master and slave power input with reverse polarity protection

- IPOE-470 supports 48~54V DC redundant power

- Supports 6KV DC Ethernet ESD protection

-   -40 to +75 degrees C operating temperature

- Plug and Play installation

Hardware Specifications


Copper Ports

4-pair 10/100/1000BASE-T RJ45

 - Data input port 1 to Port 4

-  Data + PoE output port 1 to Port 4

Connector

Removable 6-pin terminal block

Pins 1 and 2 for Power 1

Pins 5 and 6 for Power 2

Pins 4 and 4 for fault alarm

Data Rate

10/100/1000Mbps

Power Requirements

IPOE-470: 48~54V DC, redundant power with reverse polarity protection

Power Requirements (Ethernet Full Loading)

IPOE-470:

System ON without loading

 48V DC: 1.92 watts/6.6BTU

 54V DC: 2.16 watts/7.4BTU

Full loading with PoE

 48V DC: 241 watts/822.3BTU

 54V DC: 244 watts/832.6BTU

DIP Switch

Per PoE port

Off: BT/PoH – 802.3bt PoE++/PoH + Legacy 95W PoE output

ON: Force - 60w PoE output

Dimensions

50 x 87.8 x 135 mm (W x D x H)

Weight

537g

Enclosure

IP30 metal case

Installation

DIN-rail kit and wall-mount kit

LED Indicator

System:

 Power 1 (Green)

 Power 2 (Green)

 Fault (Red)

PoE Usage:

80W/160W/240W (Amber)

802.3bt PoE++ Port:

PoE-in-use x 1 (Amber)

ESD Protection

6KV

Surge Protection

6KV

Network Cable

Twisted-pair cable up to 100 meters (328ft)

10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

1000BASE-T: 4-pair UTP Cat. 5e, 6


Power over Ethernet


PoE Standard

IEEE 802.3bt PoE++, 4-pair type 4 PSE

Backward compatible with IEEE 802.3at PoE+ PSE

PoE Power Supply Type

802.3bt PoE++/PoH/Force End-span + Mid-span

802.3at PoE+ End-span/Mid-span

Power Pin Assignment

Pair 1 End-span: 1/2(-), 3/6(+)

Pair 2 Mid-span: 4/5(+), 7/8(-)

802.3bt/PoH: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Power Output

Max. 90 watts to 802.3bt PoE++ PD

Max. 95 watts to PoH PD

Max. 60 watts to force-powered PD

Max. 36 watts to 802.3at PoE+ PD

PoE Power Budget (max.)


120W@48V DC input

240W@52V-54V DC input

Number of devices that can be powered

4


Standards Conformance


Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus


Environment


Temperature

Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity

Operating: 5~90% (non-condensing)

Storage: 5~90% (non-condensing)

IEEE 802.3bt PoE++ Injector and 802.3bt PoE++ Compliant Devices Installation


Having the capability of IEEE 802.3bt Power over Ethernet standard, the IPOE-470 series can directly connect and inject power via RJ45 Ethernet cable to any IEEE 802.3bt end-nodes like PoE PTZ speed dome cameras, thin clients, all-in-one touch PCs, point of sale (POS), information kiosks, remote digital signage displays and PoE lightings.


IEEE 802.3bt PoE++ Injector and 802.3bt PoE++ Splitter Installation

For a place which is hard to find the power inlet, the IPOE-470 series and IPOE-173S can operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ (pan, tilt, zoom) IP cameras, color touch-screen voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or in enterprise office or home, as well as thin clients, all-in-one touch PCs, point of sale (POS), information kiosks and remote digital signage displays.


IEEE 802.3bt PoE++ Injector and 802.3at PoE+ Network Extension Installation


Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-470 series and PLANET IPOE-E302 PoE Extender can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-470 series. The IPOE-470 series delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining PoE power to the remote PoE IP cameras. 


Tags: ipoe470