We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

IGS-501T- 5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C)

IGS-501T- 5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C)

Overview

Slim Type with More Practicability and Convenience
The IGS-501T advanced, slim-type, industrial, hardened Gigabit Ethernet Switch with IP30 metal case consists of 5 10/100/1000Mbps auto negotiation ports and thus, it operates reliably in heavy industrial demanding environments.
Its compact IP30 standard metal case features either DIN rail or wall mount for the efficient use of cabinet space.

Stable Performance under Difficult Environments
The IGS-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C coupled with hazardous location certification (Class 1 Division 2), the IGS-501T can be placed in almost any difficult environment. The IGS-501T also possesses an integrated power supply source with a wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch Performance
The IGS-501T offers high performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 10Gbps and the 2K MAC address table, the IGS-501T can perform wire-speed packets transfer without risk of packet loss.

The flow control function enables the IGS-501T to provide fast and reliable data transfer. The Gigabit port with 9K Jumbo frame supported can handle extremely large amounts of data transmission in industrial topology that forward data to central control room.

Plug and Play
All of the RJ-45 copper interfaces in the IGS-501T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Features

Physical Port

  • 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function


Layer 2 Features

  • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (switching fabric): 10Gbps
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 1M bits on-chip buffer memory
  • 9K Jumbo packet size support
  • Automatic address learning and address aging
  • CSMA/CD Protocol


Industrial Case / Installation

  • IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support
  • Supports EFT protection 6000V DC for power line
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

Applications


Industrial Area Switch for Data Collection and Forwarding
The IGS-501T is equipped with 5 10/100/1000Mbps ports that offer auto MDI / MDIX feature, 10Gbps non-blocking switch fabric and the 2K MAC address table so that it can perform wire-speed packets transfer without risk of packet loss. The Gigabit ports supporting 9K jumbo packet can handle large amounts of data transmission in a secure topology linking to a backbone switch or high-power servers. The IGS-501T comes with a slim-type IP 30 metal case that is ideal for most heavy industrial demanding environments.
 
 


Specification


Hardware Specifications
Hardware Version3
Copper Ports5 x 10/100/1000Base-T RJ45 TP
auto-MDI/MDI-X, auto-negotiation
ConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
LED3 x LED for system and power:
 ■ Green: DC Power 1
 ■ Green: DC Power 2
 ■ Green: Power Fault
2 x LED for each copper port
 ■ Green: 1000Mbps LNK/ACT
 ■ Orange:10/100Mbps LNK/ACT
ESD Protection6KV
EFT Protection6KV
Power Requirements 12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation 4.8 watts / 16BTU (48V DC)
8.3 watts / 28BTU (24V DC)
InstallationDIN rail kit and wall-mount ear
EnclosureIP30 metal case
Dimensions (W x D x H)135 x 87 x 32 mm
Weight 498g
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer Memory1M bits on-chip buffer memory
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric10Gbps
Throughput (packet per second) 7.4Mpps @64bytes
Jumbo Frame9K
Network Cables10/100/1000Base-T
Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)]
EIA/TIA-568 100-ohm STP [100 meters (max.)]
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x full-duplex flow control
Regulation Compliance FCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~90%
Storage: 5~90% (non-condensing)



Tags: igs501t